Bridge Expansion Joints | RJ Watson home | contact | search

Ura-Tron

Sun, 21 Nov 2010 15:59:21 -0500

Ura-Tron

Ura-Tron Sealant is a two component, self leveling, fast curing, urethane sealant for use in bridge deck expansion joint sealing.

Typical applications include control joints and expansion joint systems for bridges, highways, parking structures, stadiums, plazas, water and sewage treatment facilities, and other types of concrete construction.

Ura-Tron has a very low modulus of elasticity and exhibits high elongation.

ME Seal System

Sun, 21 Nov 2010 14:48:56 -0500

Type ME Seal System consists of a thermoplastic prefabricated, compartmentalized, elastomeric, compression type seal with integral perforated wings. The Type ME Seal is used to seal expansion joints exposed to wheel and/or pedestrian traffic in parking structures, stadiums, plazas, and types of concrete structures where water tightness is required.

Silicoflex Joint Sealing System

Sun, 21 Nov 2010 14:48:46 -0500

Installation of Silicoflex

The Silicoflex Joint Sealing System is an innovative system

developed by R.J. Watson in the mid 1990’s. It was designed in

response to the absence of a sealing system that was both easy to install and offered a long, effective sealing life. This absence has been filled with Silicoflex and its features have made it a popular alternative to traditional sealing systems throughout the world.

The Silicoflex System consists of an inverted ‘V’ shaped, preformed, extruded silicone rubber seal, with a single component silicone locking adhesive and a primer. Two

beads of silicone locking adhesive are used; one above and one below the silicone rubber seal to ensure a tenacious, water-tight and continuous seal.

Zed Seal Closed Cell Foam Joint

Sat, 20 Nov 2010 14:57:05 -0500

ZED Seal is an enhanced co-polymer foam designed to give greater resilience and higher tensile and tear performance. The seal is bonded into place with a high stength single component adhesive. ZED Seal will permanently bond to concrete, steel or elastomeric concrete joint surfaces.

Poly-Tron Elastomeric Concrete

Fri, 12 Nov 2010 15:51:56 -0500

Poly-Tron is an easy to mix, three component, modified polyurethane elastomeric concrete. Poly-Tron is used primarily as an expansion joint edge material. It has excellent adhesion to various substrates, is flexible yet tough and provides excellent impact resistance. Poly-Tron is resistant to U.V. and ozone exposure and resists freeze-thaw changes.